We use cookles to Improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Home > Blog > Product Knowledge & Buying Guide > DCH-006 48V Battery: Compatibility Guide for Lectric XP and 50+ Folding E-Bikes

DCH-006 48V Battery: Compatibility Guide for Lectric XP and 50+ Folding E-Bikes

By ShunTongDa August 27th, 2026

Short answer: The DCH-006 (convex 430) is the most common 48V battery platform for folding e-bikes. It fits the Lectric XP family and 50+ other folding models — Samebike, KAISDA, BEZIOR, FIIDO, JINGHMA, Shengmilo, Engwe and more — all sharing the same 430mm convex shell, 5-pin discharge connector and 48V electrical architecture. If your folding bike's battery is a 430mm convex pack, the JD-006FZ is almost certainly the direct replacement.

1. What Is the DCH-006 Battery Platform?

The DCH-006 is a convex-head 430mm battery case used across the folding e-bike industry. "L430" (convex 430) describes the shell: a 430mm-long case with a raised/convex cap at the connector end. This is one of the highest-volume battery platforms in the folding e-bike market because dozens of brands built their frames around the same mold.

Key electrical specs (standard config)

Parameter Value
Nominal voltage 48V (13S)
Common capacities 10.4Ah / 12.8Ah / 13Ah / 14Ah
Cell config 13S4P (18650)
Discharge connector 5-pin
Typical BMS 30A hardware BMS
Shell length 430mm (convex head)
Motor support 500W / 750W (up to 1000W with 30A BMS)

2. Full Compatibility List (54 Verified Models)

Verified against manufacturer specs and official product pages. 48V versions only (a 36V variant exists — see note below).

Lectric XP family

  • Lectric XP 1.0 Step-Over (48V 10.4Ah)
  • Lectric XP 2.0 Step-Over (48V 10.4Ah)
  • Lectric XP 3.0 Long Range / XP eDition (48V 14Ah)
  • Lectric XP Step-Over 1.0 / 2.0
  • Lectric XP Lite 1.0 / 2.0 (48V 10.4Ah)
Note: Lectric XP Step-Thru models (1.0/2.0/3.0) use a different pointed-cap shell (FZZ/DCH-009 platform) — verify your connector and cap shape before ordering. The Step-Thru 3.0 has its own dedicated 48V 14Ah 672Wh pack.

Samebike / NAKXUS

  • Samebike 20LVXD30-II
  • Samebike Lo26
  • Samebike XWXL09 (Silver Arrow)
  • NAKXUS 20F063

KAISDA

  • KAISDA K1 / K2 / K3

BEZIOR

  • BEZIOR X500 / X500 Pro / X1000 / X1500 (48V 12.8Ah)
  • BEZIOR M20 / M2 / M26

FIIDO

  • FIIDO M1 Pro (48V 12.8Ah)
  • FIIDO M2

JINGHMA

  • JINGHMA R5 / R7

Shengmilo

  • Shengmilo FX-01 / R5s / MX-21

Engwe

  • Engwe Engine Pro 750
  • Engwe EP-2

Other verified models

  • AVANTREK Cybertrack 200 (48V 10Ah)
  • Vitilan V3 / V1 (48V 13.4Ah)
  • DOHIKER
  • CMACEWHEEL GT20 Pro
  • Lankeleisi X2000 Plus
  • LAFLY X3 / X5
  • KETELES K8
  • Cyrusher XF690
  • CityFun Likebike (48V 10.4Ah)
  • Eahora X7 (48V 10.4Ah)
  • RICH BIT TOP-730
  • VIVI FM20UL / SPA Series (36V/48V selectable)
  • RQLLGOOD (48V 8Ah)
  • Elbike Matrix Big Elite / Matrix VIP 13

36V variant: JD-006FZ also exists in 36V (VIVI 20", Hoverbot CB-8/CB-10, ADO A20F, ADO Beast 20F). The shell is identical — check your bike's voltage before ordering.

3. How to Confirm Your Bike Uses This Platform

Three checks, 30 seconds:

  1. Remove the battery from your folding bike.
  2. Measure the case length — it should be ~430mm (convex cap at one end).
  3. Check the connector — 5-pin discharge, and confirm the voltage label on the case (48V).

If all three match, the JD-006FZ is a drop-in replacement.

4. What to Check When Buying a Replacement

Check Why it matters
Voltage (48V) A 36V pack will not run a 48V system
Capacity (Ah) 10.4Ah ≈ 25–30 km range; 14Ah ≈ 35–45 km
Cell brand Samsung / LG / Panasonic cells last 800–1000 cycles
BMS rating 30A covers 500–750W motors safely
Connector Must be 5-pin to match your harness
Certification Look for UL 2849 / UL 2271 compliance and UN38.3

5. Safety Notes

  • Never charge below 0°C (lithium plating risk).
  • Use the matching charger — a 48V charger for a 48V pack, never a 54.6V+ charger.
  • CPSC recall awareness: some folding-bike batteries (e.g. VIVI silver-fish 36V packs, 2025 recall) have been recalled for fire risk. Check cpsc.gov before buying used batteries.
  • Store at 50–60% charge for long-term storage.

6. Related Reading

The Bottom Line

The JD-006FZ is the industry-standard 48V platform for folding e-bikes — if your bike uses a 430mm convex 5-pin pack, this is your replacement. Match the voltage, confirm the connector, choose a trusted cell brand with a 30A BMS, and you'll get years of reliable service. ShunTongDa (stdbattery.com) offers JD-006FZ replacement packs with stated Samsung/LG cells and UL-certified chargers.

What BMS Should I Look For in an E-Bike Battery? (Complete Guide)
Previous
What BMS Should I Look For in an E-Bike Battery? (Complete Guide)
Read More
Ebike Battery Ah Explained: How Many Amp Hours Do You Need in 2026?
Next
Ebike Battery Ah Explained: How Many Amp Hours Do You Need in 2026?
Read More
Message Us